Lathe Options

Lathe Options

Showing 13–18 of 24 results

  • Quick view

    Lathe mounted lamp set

    $ 199.00
    The lamp set mounts to the lathe via the socket integrated into the headstock.  A Moffatt brand articulated light is positioned on the end of the articulated arm.  The flex arm on the Moffatt lamp stays put when you position it.  Supply your own bulb, the fixture is rated for 100 watts.  You can add second fixture to the arm for lighting the outside and inside your bowl at the same time.
    Add to cartDetails
  • Quick view

    Outboard Turning Attachment

    $ 895.00
    Buy it with your lathe, or retrofit later.  The Outboard Turning Attachment bolts onto the leg assembly with four bolts using existing holes. A 1.5" solid steel bar stands upright on the floor and has a socket at the top to hold the toolrest of your choice (purchased separately).  An articulated arm positions and holds the upright in place.   Capacity to turn a table top up to 60”. The Outboard Turning Attachment is compatible with the Tilt-Away, as seen in the pictures.  We removed the tailstock from the Tilt-Away for clarity, but in most cases, it can be left on. When ordering an Outboard Turning Attachment, we will need to know the spindle height of your lathe in order to cut the upright the correct length    .            
    Add to cartDetails
  • Quick view

    Remote foot “OFF” switch

    $ 129.00
    Foot Switch OptionThe remote foot works in series with the regular stop button on the magnetic backed controller. Either one will stop the lathe spindle. It’s handy when you’re out of position or doing hollowing work when you have both hands on the tool and want to stop the lathe.
    Add to cartDetails
  • Quick view

    S16 16” Bed Extension

    $ 595.00
    The bed extension increases spindle capacity 16”. It is made from the same heavy materials as the lathe bed. You cannot use the Tilt-Away with the Bed Extension.  Buy it with your lathe or add it later.
    Add to cartDetails
  • Quick view

    S16 Caster Set

    $ 495.00

    The casters on the S16 permanently mount to the legs.  Toggle both ends down for moving and storing the lathe, and toggle them up when turning.  There are three casters total. Two straight ones are mounted on the headstock end of the lathe and one swivel caster on the tailstock end. Because both ends toggle, you have ground clearance when moving and solid footing when turning.

    Add to cartDetails
  • Quick view

    S16 Extra Banjo – Stock Size

    $ 445.00
    Especially handy when you have the gap removed for a large diameter piece and want a to turn both sides of the work without relocating the banjo.  Also useful for long spindles that require a double posted toolrest and for steady rest work when you want a toolrest on each side of the steady rest.  Toolrest not included.
    Add to cartDetails