

#3 instead of #2 MT Tailstock
$ 75.00
If you have a lot of #3 MT accessories, you may want this option. Otherwise, stick with the stock #2 as almost all woodturning accessories are #2.
Related products
-
Quick view
3 HP Upgrade (220 volt)
$ 330.00Why get the 3 HP? It’s a little like buying a pickup with the big V8 for those times you pull your RV over the mountains. Because you will occasionally turn big wood with this lathe, you will appreciate the extra power. It’s also much cheaper to order this option with the lathe, as you are just paying the incremental cost between the 2HP and 3HP. If you order the 2HP and later want to change, both the motor and drive need to be replaced, and the retail value of these two items combined is greater than $1,000.
-
Quick view
Auxiliary four outlet 110V E-box (AB)
$ 79.00A rugged industrial power strip with its own built-in 15-amp circuit breaker. It can be positioned on the front (default) or back of the tailstock leg. It has a 12’ cord that must be plugged into a separate outlet. Handy for powering sanding tools and other powered accessories at the lathe.
-
Quick view
Tool Caddy
$ 49.00A handy spot to store your centers, knock out rod and toolrests. If ordered with the lathe, it is used in lieu of the standard bed stop.
-
Quick view
S16 Caster Set
$ 445.00The casters on the S16 permanently mount to the legs. Toggle both ends down for moving and storing the lathe, and toggle them up when turning. There are three casters total. Two straight ones are mounted on the headstock end of the lathe and one swivel caster on the tailstock end. Because both ends toggle, you have ground clearance when moving and solid footing when turning.