Tilt-Away for Sweet 16
$ 625.00
A popular option for the S16 to get the tailstock out of the way for turning. Please note, it makes using the gap bed as a bed extension much more cumbersome. Buy it with your lathe or add it later.
Related products
-
Quick viewS16 Caster Set
$ 495.00Add to cartDetails
The casters on the S16 permanently mount to the legs. Toggle both ends down for moving and storing the lathe, and toggle them up when turning. There are three casters total. Two straight ones are mounted on the headstock end of the lathe and one swivel caster on the tailstock end. Because both ends toggle, you have ground clearance when moving and solid footing when turning. -
Quick view2 HP upgrade (220 volt)
$ 220.00Add to cartDetails
If you’re just working over the bed and plan to keep your work to less than 16” diameter, you’ll probably be OK with the 1.5HP. Also, if you only have access to the 110 volt electricity, you’ll be restricted to the 1.5HP. But if you have access to 220 and if you plan on taking the gap out and turning larger work, get the 2HP. It is expensive to make this change later on, as both the motor and the drive need to be swapped out. -
Quick view16” Scout Bed Extension
$ 595.00Add to cartDetails
The Scout 16” extension can be used to increase your spindle capacity from 26” to 42”. Mounted on the outboard side of the lathe, you can turn a bowl or platter up to 21” in diameter. If used outboard, you will also want to buy the toolrest extension to get your toolrest up to the proper height. -
Quick viewLathe mounted lamp set
$ 199.00Add to cartDetails
The lamp set mounts to the lathe via the socket integrated into the headstock. A Moffatt brand articulated light is positioned on the end of the articulated arm. The flex arm on the Moffatt lamp stays put when you position it. Supply your own bulb, the fixture is rated for 100 watts. You can add second fixture to the arm for lighting the outside and inside your bowl at the same time.
