Large Round Nosed Bowl Scraper – Unhandled
$ 85.00
Our large round nosed bowl scraper is made of nitrided M42 and measures 1” across and 5/16 thick. The bottom edges are radiused so that you can use it at an angle for even more effective cutting. The tang is rectangular, but will fit the 5/8″ collet in either of our ER Collet based handle systems.
Related products
-
Quick view3/8″ Bowl Gouge – Unhandled
$ 65.00Add to cartDetails
Our 3/8" bowl gouge features a parabolic flute and is made from Hardened and Nitrided M2 tool steel. It is shipped sharp and ground with a double bevel.
Parabolic flutes give a great combination of strength and chip ejection. They are amenable to finger nail (Ellsworth or Irish) grinds, conventional bowl gouge grinds and the "40/40" grind. Also available handled.
-
Quick view3/8” Detail/Spindle Gouge – with 12″ Maple Handle
$ 119.00Add to cartDetails
Our 3/8" spindle/detail gouge has a flute with shallow radius. Shipped with a 45 degree grind, many turners sharpen these types of gouges to a sharper angle, and sometime add a secondary bevel.
Many turners who are primarily bowl turners find these much friendlier for spindle turning than using a skew. The handle is hard maple with a stainless steel ferrule. -
Quick view5/8 Bowl Gouge – Unhandled
$ 99.00Add to cartDetails
Our 5/8" bowl gouge features a parabolic flute and is made from Hardened and Nitrided M2 tool steel. It is shipped sharp and ground with a double bevel.
Parabolic flutes give a great combination of strength and chip ejection. They are amenable to finger nail (Ellsworth or Irish) grinds, conventional bowl gouge grinds and the "40/40" grind. Also available handled. -
Quick viewLarge Negative Rake Scraper – Unhandled
$ 89.00Add to cartDetails
Our large negative rake scraper is made of nitrided M42 and measures 1” across and 5/16 thick. The bottom edges are radiused so that you can use it at an angle for even more effective cutting. Sharpening just the bottom bevel maintains the nitriding on the top edge. Over time, you may eventually remove the top bevel and need to regrind it to maintain the negative rake. Just remember, there is heat treated 42 under the nitriding, so you will still have a superior tool. The tang is rectangular, but will fit the 5/8" collet in either of our ER Collet based handle systems.
