1/2 Bowl Gouge – with 16″ Maple Handle

1/2 Bowl Gouge – with 16″ Maple Handle

$ 109.00

Parabolic flutes give a great combination of strength and chip ejection. They are amenable to finger nail (Ellsworth or Irish) grinds, conventional bowl gouge grinds and the “40/40” grind.

The handle is hard rock maple and turned for us in Pennsylvania. The ferrule is stainless steel. Also available unhandled.

SKU: G-500B-WH Category:

Related products

  • Quick view

    Large Skew – Unhandled

    $ 99.00
    Our large skew is made of M42 and measures 1” across and 5/16 thick. The edge is beveled 20 degrees and has been hollow ground on an 8” diameter wheel before honing to a razor sharp edge.  The cutting edge of the gouge has been ground to a gentle 2” radius.  We consulted with noted turner Matt Monaco on the profile of this grind.  The 2" radius of the profile has a small return at the top, adding versatility for cutting beads and adding details. The lower edges of the gouge have a generous radius to help rolling the gouge to make beads and coves.  The top edges also have a small radius.  The tang is rectangular, but will fit the 5/8" collet in either of our ER Collet based handle systems.
    Add to cartDetails
  • Quick view

    3/8″ Bowl Gouge – with 12″ Maple Handle

    $ 99.00
    Our 3/8" bowl gouge features a parabolic flute and is made from Hardened and Nitrided M2 tool steel.  It is shipped sharp and ground with a double bevel. Parabolic flutes give a great combination of strength and chip ejection.  They are amenable to finger nail (Ellsworth or Irish) grinds, conventional bowl gouge grinds and the "40/40" grind. The handle is hard rock maple and turned for us in Pennsylvania.  The ferrule is stainless steel. Also available unhandled.
    Add to cartDetails
  • Quick view

    3/8″ Bowl Gouge – Unhandled

    $ 59.00
    Our 3/8" bowl gouge features a parabolic flute and is made from Hardened and Nitrided M2 tool steel.  It is shipped sharp and ground with a double bevel. Parabolic flutes give a great combination of strength and chip ejection.  They are amenable to finger nail (Ellsworth or Irish) grinds, conventional bowl gouge grinds and the "40/40" grind.   Also available handled.  
    Add to cartDetails
  • Quick view

    Large Spear Scraper – Handled

    $ 139.00
    Our large spear scraper is made of nitrided premium HSS and measures 1” across and 5/16 thick. The bottom edges are radiused so that you can use it at an angle for even more effective cutting. This large spear scraper is equipped with a premium 12" Maple handle with polyurethane finish and stainless steel ferrule. Spear scrapers are great at two things: shear scraping the outside of convex shapes like bowls and hollow forms with their long curved edges, and adding details with the point. When used to shear scrape on the outside of convex shapes, they are often raised up on one edge to improve the shear angle.  We put a generous radius on these edges to facilitate use in this way.  They can also be used like regular scrapers on the inside of open shapes, like shallow bowls and platters. The point is great for adding decorative grooves and beads to the exterior of your pieces.
    Add to cartDetails