


Caster Kit
$ 395.00
The rugged 5” swivel casters are great for moving and storing the American Beauty. They snap on and off without tools. Simply raise one end of the lathe with the provided screw jack, snap the casters on, and repeat on the other end. Remove the casters when turning.
SKU: AB-CST
Category: Lathe Options
Related products
-
Quick view
S16 Caster Set
$ 395.00The casters on the S16 permanently mount to the legs. Toggle both ends down for moving and storing the lathe, and toggle them up when turning. There are three casters total. Two straight ones are mounted on the headstock end of the lathe and one swivel caster on the tailstock end. Because both ends toggle, you have ground clearance when moving and solid footing when turning.
-
Quick view
Auxiliary four outlet 110V E-box
$ 65.00A rugged industrial power strip with its own built-in 15-amp circuit breaker. It can be positioned on the front (default) or back of the tailstock leg. It has a 12’ cord that must be plugged into a separate outlet. Handy for powering sanding tools and other powered accessories at the lathe.
-
Quick view
16” Scout Bed Extension
$ 369.00The Scout 16” extension can be used to increase your spindle capacity from 26” to 42”. Mounted on the outboard side of the lathe, you can turn a bowl or platter up to 21” in diameter. If used outboard, you will also want to buy the toolrest extension to get your toolrest up to the proper height.
-
Quick view
2 HP upgrade (220 volt)
$ 220.00If you’re just working over the bed and plan to keep your work to less than 16” diameter, you’ll probably be OK with the 1.5HP. Also, if you only have access to the 110 volt electricity, you’ll be restricted to the 1.5HP. But if you have access to 220 and if you plan on taking the gap out and turning larger work, get the 2HP. It is expensive to make this change later on, as both the motor and the drive need to be swapped out.