3 HP Upgrade (220 volt)
$ 330.00
Why get the 3 HP? It’s a little like buying a pickup with the big V8 for those times you pull your RV over the mountains. Because you will occasionally turn big wood with this lathe, you will appreciate the extra power. It’s also much cheaper to order this option with the lathe, as you are just paying the incremental cost between the 2HP and 3HP. If you order the 2HP and later want to change, both the motor and drive need to be replaced, and the retail value of these two items combined is greater than $1,000.
Related products
-
Quick viewS16 16” Bed Extension
$ 395.00Add to cartDetails
The bed extension increases spindle capacity 16”. It is made from the same heavy materials as the lathe bed. You cannot use the Tilt-Away with the Bed Extension. Buy it with your lathe or add it later. -
Quick viewAuxiliary four outlet 110V E-box
$ 65.00Add to cartDetails
A rugged industrial power strip with its own built-in 15-amp circuit breaker. It can be positioned on the front (default) or back of the tailstock leg. It has a 12’ cord that must be plugged into a separate outlet. Handy for powering sanding tools and other powered accessories at the lathe. -
Quick viewLathe mounted lamp set
$ 159.00Add to cartDetails
The lamp set mounts to the lathe via the socket integrated into the headstock. A Moffatt brand articulated light is positioned on the end of the articulated arm. The flex arm on the Moffatt lamp stays put when you position it. Supply your own bulb, the fixture is rated for 100 watts. You can add second fixture to the arm for lighting the outside and inside your bowl at the same time. -
Quick view16” Scout Bed Extension
$ 369.00Add to cartDetails
The Scout 16” extension can be used to increase your spindle capacity from 26” to 42”. Mounted on the outboard side of the lathe, you can turn a bowl or platter up to 21” in diameter. If used outboard, you will also want to buy the toolrest extension to get your toolrest up to the proper height.
