Caster set for Uni-Stand
The casters for the Universal Stand are permanently attached. Toggle both ends down for moving and storing the lathe, and toggle them up when turning. There are three casters total. Two straight ones are mounted on the headstock end of the lathe and one swivel caster on the tailstock end. Because both ends toggle, you have ground clearance when moving and solid footing when turning.
Live and Drive Centers$ 19.00 – $ 158.00
Steady Rests$ 100.00 – $ 645.00
Bowl and Vessel Steady Rests
Steady rests are used to support large diameter bowls and hollow vessels when working on the interior. They are also used to support long spindles. Long hollow forms especially need the support of a quality steady rest.
We manufacture steady rests to fit five sizes of lathes: 14", 16", 20", 24" and 25". 16-25" steady rests are constructed from a rigid tubular steel ring. 14" steady rests are made from laser cut steel. All the wheels are heavy duty & industrial quality, not roller skate wheels.
Upon request, we will orient the three arm 16-25" steady rests for better laser access. We can also equip these steady rests with four evenly spaced arms.
Steady rests are made to order. You need to specify which lathe you have when ordering so that we can install the correct tenon to fit your ways. Click here for Robust Steady Rest Tips.
Tool Handles – Robust Collet Handle System$ 59.00 – $ 145.00Whether you’re changing gouges or simply taking the handle off to make sharpening easier, the Robust Collet System makes it a quick job. Just a twist of the wrist. Robust designed the system around the popular ER series collets and each system comes equipped with four common sizes. You can buy the system with or without handles: The handles are hard maple with a polyurethane finish. The overall length for the ER32 handle is 20.5″ and the ER25 is 16″. If you want to make your own handle, buy the kit. The kit has all the metal pieces, including the collets, as well as basic instructions. Collets in the ER 25 set: 1/4, 3/8, ½ & 5/8” Collets in the ER 32 set: 3/8, 1/2, 5/8 & 3/4" [su_row][su_column size="1/2"][/su_column][su_column size="1/2"][/su_column] [/su_row] Warranty Metal parts: 5 years. Wooden handle: 30 days. Please note: Wood is a natural material and while we inspect each piece visually for flaws and defects we cannot prevent breakage.View productsDetails
For Most 12 1/2″ to 14″ Lathes with 1″ Diameter Post$ 44.00 – $ 69.0025MM POST WARNING: Certain Grizzly, Laguna and other imported lathes may use 25mm posts which are slightly smaller than 1”. THESE WILL NOT WORK. PLEASE MEASURE YOUR POSTS BEFORE ORDERING. FYI: 25mm = .984”, and 1” = 25.4mm. 25mm posts are available special order. If you have a 12 1/2" to 14” lathe with 1” diameter post, such as Laguna 1216, Powermatic 2014, Delta, General, Jet or Rikon these rests will probably fit:View productsDetails