S16 Extra Banjo – Stock Size
$ 395.00
Especially handy when you have the gap removed for a large diameter piece and want a to turn both sides of the work without relocating the banjo. Also useful for long spindles that require a double posted toolrest and for steady rest work when you want a toolrest on each side of the steady rest. Toolrest not included.
Related products
-
Quick viewVacuum Adapter
$ 109.00Add to cartDetails
A vacuum adapter is the rotary coupling needed to connect a vacuum hose to the lathe spindle. It simply slides into the handwheel end of the spindle and is held in place with two 0-rings. The threads for the fittings are standard ¼” NPT (National Pipe Thread), available online or at any hardware store. This is the only part of the vacuum system we sell. -
Quick viewTool Caddy
$ 49.00Add to cartDetails
A handy spot to store your centers and toolrests. Also doubles as a stop to prevent accidently sliding your headstock off the lathe bed. -
Quick view2 HP upgrade (220 volt)
$ 220.00Add to cartDetails
If you’re just working over the bed and plan to keep your work to less than 16” diameter, you’ll probably be OK with the 1.5HP. Also, if you only have access to the 110 volt electricity, you’ll be restricted to the 1.5HP. But if you have access to 220 and if you plan on taking the gap out and turning larger work, get the 2HP. It is expensive to make this change later on, as both the motor and the drive need to be swapped out. -
Quick view16” Scout Bed Extension
$ 369.00Add to cartDetails
The Scout 16” extension can be used to increase your spindle capacity from 26” to 42”. Mounted on the outboard side of the lathe, you can turn a bowl or platter up to 21” in diameter. If used outboard, you will also want to buy the toolrest extension to get your toolrest up to the proper height.
