Extra fixture for Lamp Set
$ 95.00
Add a second Moffatt brand fixture to the Robust lamp set for lighting the outside and inside your bowl at the same time. Also useful when turning long items. Supply your own bulb, the fixture is rated for 100 watts.
Related products
-
Quick viewFor Most 15-16″ Lathes with 1″ Diameter Post
$ 49.00 – $ 129.00View productsDetails
25MM POST WARNING: Certain Grizzly, Laguna and other imported lathes may use 25mm posts which are slightly smaller than 1”. THESE WILL NOT WORK. PLEASE MEASURE YOUR POSTS BEFORE ORDERING. FYI: 25mm = .984”, and 1” = 25.4mm. 25mm posts are available special order.
NOTE: For the Oneway 1640, only the Low Profile style rests and 9” J-rest will fit.
ANOTHER NOTE: Some of the 16" Grizzly and Harbor Freight lathes, notably the Grizzly G0462 have very short banjos. You'll want to order toolrests from the 18-25" page. Depending on your situation, you may need to trim the post down to length. A few minutes with a sharp, coarse hacksaw will fix you right up. -
Quick view4″ Low Profile Rest Short Post
$ 59.00Add to cartDetails
-
Quick viewFor Most 12 1/2″ to 14″ Lathes with 1″ Diameter Post
$ 49.00 – $ 89.00View productsDetails25MM POST WARNING: Certain Grizzly, Laguna and other imported lathes may use 25mm posts which are slightly smaller than 1”. THESE WILL NOT WORK. PLEASE MEASURE YOUR POSTS BEFORE ORDERING. FYI: 25mm = .984”, and 1” = 25.4mm. 25mm posts are available special order.
If you have a 12 1/2" to 14” lathe with 1” diameter post, such as Laguna 1216, Powermatic 2014, Delta, General, Jet or Rikon these rests will probably fit:
-
Quick viewScout Extra Banjo
$ 329.00Add to cartDetails
An extra banjo is useful for long spindles that require a double posted toolrest and for steady rest work when you want a toolrest on each side of the steady rest. Toolrest not included.
