S16 16” Bed Extension
$ 395.00
The bed extension increases spindle capacity 16”. It is made from the same heavy materials as the lathe bed. You cannot use the Tilt-Away with the Bed Extension. Buy it with your lathe or add it later.
Related products
-
Quick viewS16 Extra Banjo – Stock Size
$ 395.00Especially handy when you have the gap removed for a large diameter piece and want a to turn both sides of the work without relocating the banjo. Also useful for long spindles that require a double posted toolrest and for steady rest work when you want a toolrest on each side of the steady rest. Toolrest not included.Add to cartDetails -
Quick viewGas shock assist for Tilt Away
$ 139.00The gas shock makes a great thing even better. Makes re-positioning the tailstock a one finger operation.Add to cartDetails -
Quick view2 HP upgrade (220 volt)
$ 220.00If you’re just working over the bed and plan to keep your work to less than 16” diameter, you’ll probably be OK with the 1.5HP. Also, if you only have access to the 110 volt electricity, you’ll be restricted to the 1.5HP. But if you have access to 220 and if you plan on taking the gap out and turning larger work, get the 2HP. It is expensive to make this change later on, as both the motor and the drive need to be swapped out.Add to cartDetails -
Quick view3 HP Upgrade (220 volt)
$ 330.00Why get the 3 HP? It’s a little like buying a pickup with the big V8 for those times you pull your RV over the mountains. Because you will occasionally turn big wood with this lathe, you will appreciate the extra power. It’s also much cheaper to order this option with the lathe, as you are just paying the incremental cost between the 2HP and 3HP. If you order the 2HP and later want to change, both the motor and drive need to be replaced, and the retail value of these two items combined is greater than $1,000.Add to cartDetails