Extra Banjo

Extra Banjo

$ 395.00

Useful for long spindles that require a double posted toolrest (we make those special order).  Also useful for steady rest work when you want a toolrest on each side of the steady rest. Toolrest not included.

SKU: AB-BNJ Category:

Related products

  • Quick view

    1.5 HP upgrade for Scout (110 or 220V)

    $ 150.00
    Upgrade your Scout to a 1.5 HP motor, wired to your choice of 110 or 220 volt.  If you’re going to routinely turn larger work outboard or just want the extra power for material removal, you’ll want to select the 1.5 HP upgrade.
    Add to cartDetails
  • Quick view

    2 HP upgrade (220 volt)

    $ 220.00
    If you’re just working over the bed and plan to keep your work to less than 16” diameter, you’ll probably be OK with the 1.5HP.  Also, if you only have access to the 110 volt electricity, you’ll be restricted to the 1.5HP. But if you have access to 220 and if you plan on taking the gap out and turning larger work, get the 2HP.   It is expensive to make this change later on, as both the motor and the drive need to be swapped out.
    Add to cartDetails
  • Quick view

    Auxiliary four outlet 110V E-box

    $ 55.00
    A rugged industrial power strip with its own built-in 15-amp circuit breaker.  It can be positioned on the front (default) or back of the tailstock leg. It has a 12’ cord that must be plugged into a separate outlet.  Handy for powering sanding tools and other powered accessories at the lathe.
    Add to cartDetails
  • Quick view

    Tool Caddy

    $ 49.00
    A handy spot to store your centers and toolrests.  Also doubles as a stop to prevent accidently sliding your headstock off the lathe bed.
    Add to cartDetails