1.5 HP upgrade for Scout (110 or 220V)
$ 150.00
Upgrade your Scout to a 1.5 HP motor, wired to your choice of 110 or 220 volt. If you’re going to routinely turn larger work outboard or just want the extra power for material removal, you’ll want to select the 1.5 HP upgrade.
Related products
-
Quick view3 HP Upgrade (220 volt)
$ 330.00Add to cartDetails
Why get the 3 HP? It’s a little like buying a pickup with the big V8 for those times you pull your RV over the mountains. Because you will occasionally turn big wood with this lathe, you will appreciate the extra power. It’s also much cheaper to order this option with the lathe, as you are just paying the incremental cost between the 2HP and 3HP. If you order the 2HP and later want to change, both the motor and drive need to be replaced, and the retail value of these two items combined is greater than $1,000. -
Quick viewS16 Spindle Banjo (handy for small work)
$ 395.00Add to cartDetails
The stock S16 Banjo is large and heavy so that you can use it over the gap without vibration. Some users find it clumsy for fine work, like a finial. In that case, you may want this smaller banjo that is still strong and sturdy, but shorter and lighter weight. Buy it with your lathe or add it later. Toolrest not included. -
Quick viewVacuum Adapter
$ 109.00Add to cartDetails
A vacuum adapter is the rotary coupling needed to connect a vacuum hose to the lathe spindle. It simply slides into the handwheel end of the spindle and is held in place with two 0-rings. The threads for the fittings are standard ¼” NPT (National Pipe Thread), available online or at any hardware store. This is the only part of the vacuum system we sell. -
Quick viewTilt-Away for Sweet 16
$ 445.00Add to cartDetails
A popular option for the S16 to get the tailstock out of the way for turning. Please note, it makes using the gap bed as a bed extension much more cumbersome. Buy it with your lathe or add it later.
